发送您正在配置的项目，这里很忙。
Send the project you're you're configured busy is here.

好的。
OK.

如果您想添加更多插槽，您可以单击此处，然后选择您的型号，这将出现在此处。
If you want to add more slots you can click here and you can select your model and this will come here.

好的。
OK.

因此，让我放大它，以便我可以看到我的输入和输出。
So let me enlarge it so that I can see the my the input and output.

所以对于 400 人来说，这是一个相当不错的景色。
So this is a quite a decent view at 400 person.

所以你有这些输入，这些是室外的，这是我的线对线接口。
So you have these are the inputs these are the outdoors and that's my line into line interface.

所以现在下一步是我们必须将这台电脑链接到我的电脑。
So now the next step is we have to link this PC to my to my computer.

好吧，在这种情况下您必须确保 IP 地址。
Ok in that case you have to make sure the IP addresses.

因此，如果我在这里检查我的 IP 地址，我只需双击该地址即可，您将看到此窗口，您将看到 IP 地址为 1 9 2 1 6 8 0 2 2 1。
So if I check my IP address here is I can just click on this one double click on the spot and you will have this window and you will see the IP Address this is 1 9 2 1 6 8 0 2 2 1.

这是我的 PNC 中已有的 IP 地址。
So this is the IP address already in my PNC.

现在我的电脑中的以太网卡的IP地址是1 9 2 1 6 在我的地卡中说门对门。
Now the IP address of my ethernet card in my computer is 1 9 2 1 6 Say door to the door to in my land card.

所以你必须确保它要么大于这个值，要么小于这个值。
So you have to make sure it should be either greater than this one or less than this one.

我希望您知道这是网络的基本概念。
I hope you know this one is a basic concepts of networking.

所以你看到这个 LAN IP 地址，你就是我的土地女神 1 9 2 1 出口门的 IP 地址。
So you see LAN IP addresses this one and you are my IP address of my land goddess 1 9 2 1 exit doors.

你不这样做。
You don't do.

好的。
OK.

因此，下一步是您可以在此处设置陆地界面。
So the next step is the land interface set up you can do here.

下一步是编写代码。
Next step is to write the code.

好的。
OK.

因此，要编写代码，您必须转到 Pinti 程序块。
So to write the code you have to go to Pinti program block.

单击此对象，您将找到主要对象或您必须双击此对象的对象。
Click on this one and you will find the main object or the one you have to DoubleClick this one.

所以一旦你双击这个，你就会发现一个编程字母窗口。
So once you double click this one you will find a programming letter window.

好的。
All right.

这是可以写代码的窗口。
This is the window where you can write the code to write the code.

我们需要什么，我知道联系实体的联系输出，并且是公正的它将从这里接收任何联系。
What we need and I know contact enty contact output and are in impartial It will take in any contact from here.

这是反枪型的一端，也是输出接点。
This is an end of an anti-gun type and an output contact.

现在没有人知道我需要它，并且可以部分输入那个那个，因为我需要这个。
No one know it now I need and can type in part into that and that because I need this one.

在这里你会学到很多这样的东西。
And here you will take about a lot like this.

然后你可以让另一个死亡，然后你必须在此处添加此操作，你必须单击此处一次并释放该单击此处。
Then you can take another one died and then you have to add this here to do that you have to click here once and release that click here.

这就是将其链接起来的方法。
So this is how you can link it up.

现在要进行寻址有两个步骤。
Now to do the addressing there are two steps.

首先，因为您可以管理您的地址，所以我们需要的地址要么是那个地址，要么您知道 0.1 使用它或不使用它。
First up as you can manage your the address so the address which we need is either that or you know 0.1 use it or don't you.

因此，要手动执行此操作，您可以单击右键。
So to do that manually you can click right.

无论您是否按下回车键，您的地址都会像这样输入。
Either you do or don't you press enter so your address will be entered like this.

这是一个标签。
And this is a tag.

这是评论。
This is the comment.

您可以更改标签名称，以便查找 Mahzarin 可以轻松启动 OK。
You can change the tag name so that you can look up Mahzarin could easily start OK.

正确的。
Right.

开始单击更改。
Starting click change.

因此，如果你想在这里写 Daag，另一种简单的方法是让它浮动。
So if you want to write Daag here the other easy way is you can make it to float.

我想调整它的大小，我的 Peasey 在这里。
And I would like to resize it and I have my Peasey here.

因此，最好的方法是快速将我的第二个输入拖放到此处，这是链接。
So the best way is to quickly drag and drop here my second input this is link.

这是正确的。
It is the right one.

我可以阅读开始的内容，我可以在这里看到停止符号，它也在我的电脑中。
And I can read the stuff to start and I can see the stop symbolists here and it's also in my PC.

我可以把我的输出放回这里，然后我可以阅读它。
I can put my output back here and I can read that to light.

这里将会改变。
It will change here.

另一个有趣的事情是，如果你这里有光，那么这里就会有黑暗。
Another interesting thing is if you're just right here light you would have a dark here.

再次按 Enter 键，它会显示同一时间。
Press enter and again it will show you the same time.

您还可以编写标签名称以自动获取地址。
You can also write your your tag name to get the address automatically.

所以我们回到我的嵌入。
So we go back to my embed.

现在您可以看到，这是一种从 PC 本身标记您的地址的简单方法。
Now you can see that this is such a easy way to tag your addresses from the PC itself.

好的。
OK.

我在巴格达回到了我的窗口，你可以在这里看到这个窗口。
So I've been in Baghdad back to my window and you can see this window here.

这是我的电脑，这也是我的我，包括你在内。
This is my PC and this is my me you included.

您可以再次将其嵌入回来。
And you can embed it back again.

这就是您可以编写可以放置寻址的逻辑的方法。
So this is how you can write the logic you can put the addressing.

现在，下一步是结合任何错误的逻辑，以便从这里进行编译。
Now the next step is to combine the logic for any error so the compiling as and from here.

这是联合新闻联合体，正在编译。
This is the combined press combine and it is compiling.

如果有任何错误，它会在此处的窗口中显示。
And if it has any errors it will show you in the window here.

这是结合起来的。
This is combined.

它显示零 0 0 警告。
It shows zero 0 0 warning.

就编译成功了。
It's compiled successfully.

现在，下一步是在我的电脑中下载此逻辑，因此要下载我必须在此处使用此按钮。
Right now the next step is to download this logic in my PC so to download that I have to use this button here.

不要让设备点击这里，它会再次检测我的 IP，看看它是否配置正确，然后它会下载到我的电脑，这样就会出现一个窗口，显示你的电脑的长度和你的电脑的长度。个人电脑。
Don't let the device click here and it will again detect my IP and see if it is properly configured and then it will download to my PC so that it will be a window which will come which will show the length of your PC with your PC.

所以这是第一次完成，只需点击开始搜索，它就会搜索连接到你的土地神的IP地址。
So this is done for the first time only you have to click on Start Search for it will search the IP address which is connected to your land God.

好的。
OK.

所以它在这里找到了一个普西。
So it found one Pusey here.

所以可以肯定这是我的 PNC 设备。
So it was sure that here this is my device of PNC.

所以在一千二百内我可以加载它。
So in twelve hundred and I can load that.

所以这一步只完成一次，因为这是我们制作的第一个。
So this is done just once because this is the first one that we are making.

所以说美国
So it says that the U.S.

应该在停止mod下载模型的东西下载。
should be at the stop mod for downloading the model stuff for downloading.

所以没关系，我可以阻止它们，或者您可以单击“停止”并加载。
So it's ok I can stop them or you can click stop on and load.

因此，PC 将从运行状态变为停止状态。
So the PC will go from run to stop more.

这是橙色灯，然后将下载逻辑。
This is the orange light and then the logic will be downloaded.

所以它说你想再次启动设备吗？
So it says Do you want to start the device again.

我会说是的。
I would say yes.

因此它会将我的电脑从停止模式切换到运行模式。
So it will move my PC from stop mode to run mode.

现在这是一对一。
This is a on one now.

不，我的逻辑被下载，逻辑说如果我不这样做，我的第一个输入输出将被存入应该起作用的检查。
No my logic is downloaded the logic says if I don't on my first input output will be lodged to the check that should work.

是的，这是有效的。
Yeah this is working.

我的输入已打开，输出也已打开，但我不希望我的输入输出保持打开状态。
My input is on and output is on and I don't want my input output remains on.

这意味着它是猛烈的。
It means it is lasht.

如果我不这样做，我的第二个输入我的输出就会关闭，因为它被放大了。
If I don't I my second input my output goes off because this is enlarged.

好的。
OK.

因此，为了使其看起来更容易理解，我可以做的就是监视 NetLogic，这是下一步 a.e，因此要监视此幻灯片逻辑，我可以单击此处监视开关。
So to make it looks more easy to understand what I can do is I can monitor the NetLogic is the next step one a.e so to monitor this slide logic I can click here monitoring on off.

因此，一旦您点击此处，它就会实时向您显示宠物的状态。
So once you click here it will show you the status of your pets in real time.

所以这个绿色意味着它是真正的蓝色意味着它是向前的。
So this green means it's true blue means it's forward.

这是真实的。
This is true.

这个联系是真实的。
This contact is true.

你不应该感到困惑。
You should not be confused.

这里没有光，但这种联系是真实的。
There is no light here but this contact is true.

因为这是古董，在我第二次输入时就死了。
Because this is an antique and died on my second input.

那么我们首先来了解一下这个触点的功能。
So let's first understand the functioning of this contact.

这是真的，因为这是假的。
This is true because this is false.

这是我输入的逆逻辑。
This is the inverse logic of my input.

这是。
This is.

这是 N 个词，所以这是真的。
This is the N word so this is true.

如果这是真的，则这是第 n 个词，依此类推。
If this is true this is the n word and so forth.

因此，当我进行第二次输入时，如果蓝色指示字体正确，请让我将其变为真。
So let me just make it true when I make my second input should this goes for blue indicate fonts right.

那么让我们再次同步它。
So let's synchronize it again.

我会打开我的第一个输入，我的输出是正确的。
I would turn on my first input my output is true.

所以这由绿线表示。
So this is indicated by this green lines.

这个很重要。
This is important.

这是真的，如果我关闭输入，这就会变成假，这是真的。
This is true and if I turn off my input this goes false this is true.

接下来，如果我打开第二块板，它将打开，并且将像这样解锁输出。
Now next if I turn on my second board this will be open and which will unlatch the output like this.

例如，您可以在这里看到字体。
So this is for instance you can see here fonts here.

好的。
All right.

这就是您如何监控您的 PC 软件 TIAA 中的逻辑。
So that's how you can monitor your PC that the logic in your software TIAA.

这是监视逻辑的一种方法。
This is one way to monitor the logic.

第二种方法是你可以使用大卫手表。
The second way is you can do using a watch David.

那么我们也这样做吧。
So let's do that as well.

我去看它就像看大卫一样。
I go to watch it like I do watch David.

好的。
OK.

所以我们把地址放在这里。
So here we put the address.

我没有看到你按 Enter 0 2。
I don't see you press enter 0 2.

对不起。
Sorry.

一只可爱的小狗，你是对的。
One cute little dog you are right.

这是我使用逻辑的三个领域，然后我会去找我的老师。
These are the three areas in which I'm using my logic then I will go to my teacher.

现在你可以看到这些是因为我的输入和输出，这也是我存在的状态，这就是运行模式。
Now you can see that these are for because my inputs and outputs as far as this is also the status of my being c this is that run mode.

现在，如果我不进行第一次输入，您就会发现这是真的。
Now if I don't on my first input you can see that this is true.

这是真实的。
This is true.

所以这两个都是真的。
So these two are true.

要么就是这样，要么你用一两个词。
Either that or do you use a word or two.

这是监视输入而不是后面的逻辑的另一种方法。
This is the another way to monitor the input instead of later logic.

现在，如果我成功了一次，您可以在这里看到我输入的实时状态，如果我通过第二次输入，现在就可以了。
Now if I make it once you can see the realtime status of my inputs here if I make it through the second input now will be all.

这是真实的。
This is true.

所以这在这里是正确的。
So this is true here.

这是我在使用这些女士安装状态时输入和输出的数据表示。
So this is data presentation of my means input and output in the using these ladies to install status.

如果我的公交车跑得更多，你可以看到这里运行，如果我进入停止模式，我可以点击这里的停止来给我一个警告。
And if my busies had run more you can see that run here if I make it to stop mode I can click the stop here to give me a warning.

现在这会让我的呼吸更加停止。
Now this will make my breathing stop more.

你可以看到这是一个停靠点。
And you can see that this is a stop.

现在，当您看到停止运动时，您正在拉动一些逻辑，即使它按照逻辑打开，它也不会解决逻辑，因此它不会打开。
Now when you see that stop motion you are pulling some logic will not work even if it is on as per the logic it will not solve the logic so it will not be on.

因此，您必须确保如果您正在测试逻辑，您的 PC 应该处于运行模式。
So you have to make sure if you are testing your logic your PC should be on the run mode.

好的，我可以返回运行模式。
Ok so I can go back to run mode.

现在，我们在本课中必须了解的另一件事是力稳定。
Now another thing we have to understand in this lesson is the force stable.

现在想象我们使用相同的字母逻辑，并且我的输入已损坏 我的输入已损坏，这不起作用。
Now imagine we are using the same letter logic and my input is damaged my input is damaged this is not working.

我只是给你一个选择，但我想对我的输出做一个。
I'm just giving you as an option but I wanted to do an on my output.

这是紧急情况。
This is an emergency.

好吧，我怎么能做到这一点。
OK how I can do that.

但这不起作用。
But it's not working.

我没有时间更改输入。
I don't have time to change the input.

所以我能做的是，如果我的电脑只连接到我的电脑，我可以快速强制它强制它。
So what I can do is if my pc is only linked to my computer I can quickly force it to force it.

我可以去马厩并报告地址。
I can go to the stable and I report the address.

我必须按 Enter 键作为空军输入。
I have to press enter as an Air Force input.

好的。
OK.

如果我记得这一点，该标志将直接进入我的输出。
If I remember this the sign is directly going to my output.

好的，所以我单击右侧的两个一，然后单击“是”。
OK so I click on right for two one and click yes.

因此，如果我强制为一，您可以看到我的输出已打开，但此处的输入未打开，但我强制了它。
So if I force to one you can see that my output is on but input here is not on but I forced it.

现在你必须记住，这些女士正在反映你的输入硬件输入的状态。
Now you must remember that these ladies are reflecting the status of your input hardware input.

好的。
OK.

不强制输入。
Not to force input.

如果您看到后面的逻辑，则输入要么为真，要么为真。
If you see the later logic the input either that or it is true.

但这里却是被迫这样写的。
But here it's written as it is forcibly to.

这就是软件中断，你可以说是通过软件。
This is the software interrupt you can say that by software.

这是真实的。
This is true.

这就是为什么你在这里有这个指示。
That's why you have this indication here.

好的。
OK.

如果你的输入是真实的硬件，你将在这里拥有这个埃洛迪，你不会在这里拥有他的力量，但我的对象曾经解决了我的过度设计，因为我强行打开它。
If your if your input is true by the hardware you will have this Elodie here you will not have his force here but my object ever solved my overdesign because I forcefully turn it on.

我也可以强制关闭它。
I can also forcefully turn it off.

好的，我回去寻找稳定的右势力来见你。
OK so I go back to for stable right force to see you.

是的。
Yes.

现在我强行将其关闭，但我的输出仍然保留在 Vagos 上，这是由于逻辑原因造成的。
Now I forcefully turn it off but my output remains on Vagos this is lasht because of the logic.

接下来，我将强行放弃这个赌注，以解开我自己的脚，只是为了解释。
Now next I will forcibly dump this bet on to unlatch my own foot just for the explanation.

所以我一按回车键就清零了。
So I right I zeroed out one press enter.

右赖希利希接近一。
Right reichlich close to one.

是的。
Yes.

现在在这种情况下输出会关闭，因为按照我的逻辑这是正确的。
Now in this case output goes off because in my logic this is true.

所以输出关闭。
So output is off.

现在您会注意到我们还有另一个灯亮着，它是维护灯，因为强制通常是在平凡模式下完成的。
Now right now you will notice that we have another light on which is the maintenance light because the forcing is done generally in mundaneness mode.

因此，您的这个平凡指示灯亮起，表明您的电脑中存在一些力量。
So you have this mundaneness light on which indicates that you have some forces present in your PC.

因此，这是故障排除提示之一，如果您正在对 PC 进行故障排除并且发现此灯亮起，则您必须了解您所施加的力的 PC 中正在发生某些情况。
So this is one of the troubleshooting hint if you are troubleshooting a PC and you find this light is on you must understand there's something going on in the PC you have some forces on.

好的。
OK.

因此，要消除您可以返回稳定的力量，如果您的目标是归零，那么您只能将其归零。
So to remove the forces you can go back to for stable if your objective so all you can go back for is that to zero you have to make it to zero.

移除所有的力量然后你从这里移除力量。
Remove all the forces then you remove the forces from here.

停止势力。
Stop the forces.

是的。
Yes.

所以当你移除力量时，你可以看到这个人的光从这里熄灭了。
So when you remove the forces you can see that this man its light are off from here.

现在没有任何世俗的光芒，是正常运行模式的一部分。
There is no mundaneness light now appeals is part of normal run mode.

好的。
OK.

现在，我可以在这里使用我的输入和输出拉丁语，这就是您如何使用 TIAA 的基本功能。
Now here I can use my input my output Latin and this is how you can use the basic features of the TIAA.

因此，我们在本课中学到的是，我们已经配置了我们拥有的能力，以及我们为我们监控的地址提供的字母逻辑，并且我们有语音，但我们使用强制表打开和关闭它。
So what we have learned in this lesson is we have configured the ability we have it and the letter logic we have given the addresses we have monitored that and we have voice but we turn it on and off using the force table.

那么让我们回到幻灯片来回顾一下我们所做的事情。
So let's go back to our slides to review what we have done.

简单的灯光就很好。
Simple lighting so good.

这些是您所遵循的内容。
These are the stuff which you have followed.

第四步是创建项目。
So the fourth step was creating the project.

其次是插入后面的逻辑，然后寻址逻辑中的内容，以便 C.P.
Second was inserting the later logic then addressing the in logic so that it can the C.P.

我们在第一步中完成的所有操作然后我们添加了IP地址我们已经下载了这个逻辑我们有你知道Rypien看到的操作然后我们已经使用它来稳定地监控我们监控的所有输入和输出该表中的值。
all which we've done in the first step then we added the IP addresses that we have downloaded this logic we have the operation you know Rypien see then we have used that was stable for monitoring where monitoring all the inputs and outputs we have monitor the values in this table.

然后我们就得到了哦，这就是我们今天所做的一切。
And then we have oh that's that's all we have done today.

这就是我们的总结。
So this is the summary we have.

恭喜。
Congratulations.

好吧，如果您在自己的业务中与 CDO 一起遵循此步骤，您已经对这台 PC 执行了简单的基本编程，接下来的视频我们将做更多说明，您可以在此处找到学习说明。
Well you have if you are following this step in your own business along with the CDO you have performed a simple basic programming of this PC and the next for the videos we will be doing some more instructions will be learning instructions which you can find here.

但很多时候，对手都会来上课。
But lots of time where a counter competitor will come into for the lessons.

我们将看看他们如何使用它。
We'll see how they can use that.

有趣的是我将使用一个软件工厂来制作一个工厂自动化示例。
And the interesting thing is I'll be using a software factory I'll to make a factory automation example.

我们将使用某种传感器，并将其与西门子中央情报局联系起来，看看操作是如何进行的。
We'll be using some kind where some sensors and we'll be linking that with our Siemens CIA to see how the operations are working.

因此，这会更有趣，以便您可以将其链接起来，您可以了解命令的基本义务和行业对自动化的影响。
So this would be more interesting so that you can link it you can understand the basic obligations of commands and industry affect the automation.

好的。
OK.

因此，如果您需要此演示文稿的副本，您可以在课程中找到它。
So if you need a copy of this presentation you will find it in the course.

显然在下一课中。
So obviously in the next lesson.

谢谢。
Thank you.